Filter
Top Products
4.14 Touch Pad 4 Replacement Procedures
4.14 Touch Pad
Removing the Touch Pad
To remove the touch pad, follow the steps below and refer to figures 4-21.
1. Disconnect the touch pad flexible cable from the connector PJ3201 on the system
board.
2. Remove the following screws securing the touch pad.
• M2.5×8B FLAT HEAD screw ×1
• M2.5×4B FLAT HEAD screw ×1
3. Remove the touch pad.
T
ouch pad flexible cable
M2.5
×
8B FLAT HEAD
M2.5
×
4B FLAT HEAD
Figure 4-21 Removing the touch pad
4. Disconnect the touch pad flexible cable from the connector on the touch pad.
Satellite M30-35 Maintenance Manual (960-455) 4-39