Filter
Top Products
199
If Something Goes Wrong
Resolving a hardware conflict
Run ScanDisk on the faulty diskette (for instructions, see Disk
drive problems on page 197).
DVD-ROM drive problems
DVDExpress has been configured to provide optimum
performance and quality based upon your system’s available
resources. Changes made to the system or its configuration may
impact the playback performance of the DVDExpress player.
General issues
DVDExpress controls are disabled.
Controls may be grayed out by commands on the DVD. For
example, it is common for DVD movie titles to disable fast-
forward and rewind during the legal notices at the beginning of a
movie.
Playback performance is poor.
The use of DMA dramatically increases the DVD playback
performance of your system.
To make sure DMA is turned on and check its settings:
1 Open the Start menu, point to Settings, then click Control
Panel.
2 Double-click the System icon, then select the Device
Manager tab.
3 Open the CDROM device folder, select your CD-ROM
device driver, then click Properties.
4 Select the Settings tab, click the DMA check box, then click
OK.
The system must be restarted for this setting to take effect.