Filter
Top Products
82
Learning the Basics
Powering down the computer
Powering down the computer
When you power down the computer, you have three options to
choose from: Shut down, Standby, and Hibernation.
TECHNICAL NOTES: Before using any of these methods to
power down your computer, save your files and make sure
the disk activity lights are off.
If you change your mind and decide to continue working
after all, wait a few seconds before turning the computer on
again.
Using Shut down
The Shut down command shuts the computer down completely.
When you start up again, the computer runs a self-test and loads
the operating system. You must open any programs and files you
want to use.
Factors when choosing Shut down:
❖ No power is used while the computer is shut down. This is the
most efficient mode if you will be away from your computer
for an extended time.
❖ Restarting from Shut Down uses the most time and battery
power.
❖ When starting up again, the system does not automatically
open programs and files you were previously using.
To power down the computer using the Shut down command,
click Start, Shut Down, select Shut down, then click OK.