Filter
Top Products
Analog and Digital Audio AGC –
Fire Tone-Out Standby –
Broadcast Screen –
Custom Screen –
Dropout Delay –
Attenuator –
Repeater Reverse –
Channel Alert –
Memory Check –
Scan and Search Operation –
Custom Alerts –
Helps automatically
balance the volume level between different radio
systems.
Lets you set the scanner to
alert you if a two-tone sequential page is transmitted.
You can set up to 10 settings (transmit frequency, tone
frequencies) then select one for standby monitoring.
Sets the scanner so it ignores
Close Call ™ or search hits on known broadcast
frequencies including pager frequencies.
Lets you input up to 10 frequency
ranges that the scanner will ignore during Close
Call™ or search operation.
You can set whether the scanner
pauses at the end of a transmission to wait for a reply.
You can set the delay time for each system you scan,
and while searching and using the Close Call ™
feature.
You can set the scanner’s attenuator to
reduce the input strength of strong signals by about
18 dB.
You can set the scanner so it
switches to the input frequency on a conventional
repeater system.
You can set the scanner so it alerts
you when there is activity on any channel you specify.
Lets you see at a glance how much
total memory is left.
Lets you include
selected service searches or custom search ranges
during normal scan operation.
For each alert in the scanner (such
as channel alert, Close Call alert, emergency alert),
you can select from 9 different tone patterns and also
set the alert volume level independently from the main
volume level.
Feature Highlights
9