Uniden UBCD396T Scanner User Manual


 
Care and Maintenance
113
General Use
Location
Cleaning
Turn the scanner off before disconnecting the
power.
If memory is lost, simply reprogram each channel.
Always press each button firmly until you hear the
entry tone for that key entry.
Do not use the scanner in high-moisture
environments such as the kitchen or bathroom.
Avoid placing the unit in direct sunlight or near
heating elements or vents.
If the scanner receives strong interference or
electrical noise, move it or its antenna away from
the source of the noise. If possible, a higher
elevation might provide better reception.
Also try changing the height or angle of the
antenna.
Disconnect the power to the unit before cleaning.
Clean the outside of the scanner with a mild
detergent.
To prevent scratches, do not use abrasive
cleaners or solvents. Be careful not to rub the LCD
window.
Do not use excessive amounts of water.
Care And Maintenance