Filter
Top Products
Programming Radio Systems
64
n
E
Program System
Set Frequencies
New Frequency
is a number that increments as you add new
systems. indicates that this is an EDACS system.
Next, refer to the appropriate section to set
systemwide options. For most settings, you can
accept the default. However, for the items in , you
must enter information in order for your scanner to
scan the system.
• See “Editing the System Name” on Page 70
• See “Editing the System Quick Key” on Page 71
• See “Setting System Lockout” on Page 71
• See “Setting the System Hold Time” on Page 72
• See “Setting the Channel Delay Time” on Page 72
• See “Setting ID Scan/Search (Trunked Systems
Only)” on Page 73
• See “Setting I-Call (Motorola and EDACS Systems
Only)” on Page 77
• See “Adjusting the P25 Level (Motorola and
Conventional Systems Only)” on Page 79
• See “Setting the EDACS ID Format (EDACS
Systems Only)” on Page 80
• See “Reviewing Locked Out Frequencies” on
Page 79
• See “Setting Channel Attenuation (Conventional
Channels Only)” on Page 88
• See “Deleting Systems” on Page 81
• See “Copying Systems” on Page 81
• See “Setting System Frequencies” on Page
64 (below)
• See “Entering/Editing EDACS Channel Groups”
on Page 65
Select the system
bold
Setting System Frequencies