Filter
Top Products
Select the channel
This setting controls whether the scanner attenuates
signals on this channel. Select your setting, then press .
- the channel is attenuated by about 18 dB.
- the channel is not attenuated.
• The default setting is .
• For trunked systems, the attenuation is a system-level
setting.
• You can also toggle this setting by holding on the
channel and pressing and .
Select the system
Select the group
Select the channel
This setting determines whether the scanner will scan
this channel when its system and group are enabled.
Select your setting, then press .
- the channel is not scanned.
- the channel is scanned.
Notes:
Set Attenuator
On
Off
Off
Program System
Edit Group
Edit Channel
Set Lockout
Lockout
Unlocked
E
Notes:
E
E
E
E
E
E
Setting Channel Lockout
• The default setting is .
• You can also lock or unlock a channel by selecting
it while scanning or holding, then pressing .
See “Basic Operation” on Page 38.
Unlocked
L/O
Programming/Editing Optional Settings
89