Filter
Top Products
Using the Close Call Feature
101
Setting Close Call Options
Close Call
Close Call Only :
CC Auto Store :
Set CC Mode :
Set CC Override :
CC Found!
E to Listen
Set CC Pause
Select your setting, then press the scroll control.
Then turn the scroll control to select an option.
• Lets you set the scanner
only for Close Call searching. The scanner
does not scan frequencies or channels when
this option is turned on. To select this option,
press .
• Lets you select whether the
scanner automatically stores Close Call hits
into channels. If you turn this option on, the
scanner starts Close Call mode and stores any
Close Call hits, up to the maximum you
specified in the Max Auto Store setting. If the
scanner stores more hits than this setting, it
stops Autostore operation.
Turn the scroll control to display an option, then
press the scroll control.
• Lets you select the Close Call
mode. If you turn this option on, the scanner
sets itself to its Close Call settings about once
every 2 seconds.
Turn the scroll control to display an option, then
press the scroll control.
You can also toggle this setting by pressing
then
• Lets you select how the
Close Call feature works with other scanning
activities. If you turn this option off, when the
scanner detects a Close Call signal,
and ” appear for the
time you set in . Press the
scroll control or when this appears to jump to
and hold on the frequency.
If this option is turned on, the scanner overrides
the current channel and goes to the Close Call
E
E
”