Filter
Top Products
Other Settings
50
Turning Power Save On or Off
Priority Scan
Using the Backlight
Settings
Set Battery Save
On
Off
Set Priority
Off
On
Plus On
Settings
Set Backlight
10 sec
30 sec
Squelch
• The scanner goes into low-power mode when
you monitor a conventional channel that has no
activity.
• Power save is off.
Or, while holding on any channel, press
to select one of these priority modes:
• Normal scanning
• While scanning a conventional system, the
scanner interrupts every 2 seconds and checks
the priority channels in each unlocked
conventional system. Priority channels in lower
priority key numbered systems (starting from 1)
have highest priority. PRI appears when you
select this mode.
• The scanner only scans priority
channels in unlocked conventional systems.
PRI flashes when you select this mode.
• The backlight stays on for 10 seconds
after you press .
• The backlight stays on for 30 seconds
after you press .
• The backlight turns on when the
squelch opens then stays on for 5 seconds.
+ 1/Pri