Filter
Top Products
Programming/Editing Optional Settings
71
Editing the System Quick Key
Setting System Lockout
Program System
Edit Sys Option
Set Quick Key
Program System
Edit Sys Option
Set Lockout
Lockout
Unlocked
Select the system
After selecting this option, select any number from
0-99 to assign the system to a quick key or press to
assign the system to no quick key, then press .
• Access single-digit system Quick Keys by
pressing the single digit on the keypad during
scanning. Access two-digit system Quick Keys by
pressing then both digits.
• You can assign as many systems to the same
quick key as you want.
• To be scanned, a system’s quick key must be
activated and the system must be unlocked.
Select the system
This setting controls whether the system is scanned
when its quick key is enabled. Rotate the scroll control
to select your setting, then press .
- the system is not scanned
- the system is scanned
You can also lock or unlock a system by holding
and rotating the scroll control to select the
system, then pressing + L/O.
E
Hints:
E
Note: