Filter
Top Products
Basic Operation
Basic Operation
38
Turning On the Scanner and Setting the
Squelch
Note:
Note:
Note:
Make sure the scanner's antenna is connected
before you turn it on.
1. Press and hold for about 2 seconds to turn on
the scanner.
2. Briefly press the scroll control
once. and a
number appear on the display.
3. While appears, rotate the scroll
control to set the volume to a comfortable listening
level.
If you do not press any key or turn the scroll
control within about 10 seconds,
disappears. If this happens, simply press the
scroll control again.
4. While holding down on the left side of the
scanner, briefly press the scroll control once.
and a number appear on the
display.
5. While appears, rotate the scroll
control to set the squelch to the level you want.
If you do not press any key or turn the scroll
control within about 10 seconds,
disappears. If this happens, briefly press the scroll
control while holding down .
VOLUME LEVEL
VOLUME LEVEL
VOLUME LEVEL
SQUELCH LEVEL
SQUELCH LEVEL
SQUELCH LEVEL
Brisbane