Filter
Top Products
Searching and Storing
94
Editing a Custom Search Range
You can edit up to 10 custom search ranges. The
names of the custom search ranges appear on the
display. The default custom search range names
appear as , and so on.
OR
+ Scan/Srch
Select your setting, then press the scroll control.
- lets you edit the custom search range’s
name.
- lets you view and select the
frequency ranges to search. The scanner prompts you
to enter the upper and lower search limits.
- lets you set the amount of time
the scanner will delay before continuing to search
after a transmission ends.
- lets you set the custom search
range’s modulation type.
- lets you set whether the scanner
will attenuate reception by 18dB during search.
- lets you set whether the scanner
will skip data transmissions during search.
- lets you set the custom search range’s
step (the gap between frequencies).
- lets you search for a Motorola
control channel. If it finds one, the scanner scans the
system.
- adjusts the digital decode
threshold to match the transmission you are
hearing when it receives a strong signal and has a
high decode rate.
- sets whether the scanner
includes the custom search during scanning.
Custom 1 , Custom 2
Search for ...
Edit Custom
Edit Name
Edit Srch Limit
Set Delay Time
Set Modulation
Set Attenuator
Set Data Skip
Set Step
Set C-Ch Only
Adjust P25 Level
Search with Scan