Filter
Top Products
Searching and Storing
97
Selecting a System
Storing a Conventional System
To store frequencies or talk group ID’s you find during
Auto Store, you must first select a system where the
frequencies or talk group ID’s will be stored.
Select the system where you want to store the
frequencies or talk group IDs
If no systems are programmed,
appears. If you have already stored too many
systems, appears.
You can store frequencies into the system you
selected in “Selecting a System”. Otherwise, the
scanner stores frequencies in a new group it creates.
1. Follow the steps under “Selecting a System” on
Page 97 (above). A search option appears.
2. Turn the scroll control until the type of search you
want appears, then press the scroll control to
select it. A search band appears.
If all systems are locked out, All Locked! appears
and the scanner does not store any
frequencies.
When you select a search range, the scanner looks
for active frequencies within that range and
appears on the display’s lower line and
the system name and search range name appear on
the display’s upper line. When the scanner finds an
active transmission, it checks to see if the frequency
has already been stored in the system. If the
frequency has already been stored, the scanner
continues to search. If the frequency has not been
stored, it stores the frequency into a group named
Search for ...
+ Scan/Srch
Search and Store
No System Stored
Over Limit
SEARCH
AND STORE
OR