Filter
Top Products
Search and Close Call Options
108
This setting controls the attenuator for quick search
and Close Call operation. Select your setting, then
press the scroll control.
The attenuator is off.
Reception is attenuated by about 18 dB.
Turn on this setting if you are near other strong
signal sources. Attenuation sometimes helps to
reduce interference and desensitization that strong
signals create.
This setting controls how the scanner behaves when it
stops on a channel that has a data signal.
- the scanner stops briefly on the channel, but then
immediately resumes scanning automatically. Press
to select.
- the scanner remains on the channel until the
transmission stops. Press the scroll control to select.
• If you are trying to test the Close Call feature with
a nearby transmitter and you do not talk into the
transmitter, the scanner will detect this as data and
will skip the frequency when Data Skip is on. Turn
the feature off or talk into the transmitter.
• This setting is ignored for AM channels.
• The default setting for this feature is .
Off
On
Srch/CloCall Opt
Set Data Skip
On
Off
Off
Note:
E
Notes:
Setting Data Skip