Filter
Top Products
Searching and Storing
95
If unlocked, the scanner first scans all selected
systems, then searches the selected service searches
for the selected hold time (0-255 seconds).
You can change the way service search works for
each service.
OR
+ Scan/Srch
Select your setting, then press the scroll control.
• This setting determines how
long the scanner waits after a transmission ends
before resuming quick search or Close Call
operation. Select your setting, then press the scroll
control.
The scanner resumes immediately when
the transmission ends.
The scanner waits the set amount
of time after the transmission ends before
resuming.
The default setting is .
• Set Attenuator This setting controls the
attenuator for search operation. Select your
setting, then press the scroll control.
The attenuator is off.
Reception is attenuated by about 18 dB.
Turn on this setting if you are near other
strong signal sources. Attenuation sometimes helps
to reduce interference and desensitization that
strong signals create.
• This setting controls how
search with scan works.
Editing a Service Search
Search for ...
Edit Service
Set Delay Time
Off
1-5sec
2 sec
Off
On
Search with Scan
Note:
Note: