Filter
Top Products
Setting Up Your Scanner
32
WARNING!
Never connect any part of the headphone jack to
the antenna jack or connect the radio to an
installation where the antenna and audio
connection are grounded. This might damage the
scanner.
To make your scanner easier to carry when you are
on the go, use the supplied belt clip. Rotate the
scanner upside down to remove it from the clip.
To keep your scanner safely close at hand, use the
supplied wrist strap. Push the small loop on one end
of the wrist strap through the lug on the right side of
the scanner, then thread the other end of the wrist
strap back through the small loop to secure it.
Your scanner's keys have various functions labeled on
the key tops and below the keys.
To select the function labeled on a key, simply press
the key. To select the function labeled below a key,
hold down on the left side of the scanner then
press the key. appears on the display.
Attaching the Belt Clip
Attaching the Wrist Strap
A Look At The Keypad