Filter
Top Products
Programming Radio Systems
67
• See “Setting the System Hold Time” on Page 72
• See “Editing the System Quick Key” on Page 71
• See “Setting the Channel Delay Time” on Page 72
• See “Setting ID Scan/Search (Trunked Systems
Only)” on Page 73
• See “Reviewing Locked Out Frequencies” on
Page 79
• See “Setting Channel Attenuation (Conventional
Channels Only)” on Page 88
• See “Deleting Systems” on Page 81
• See “Copying Systems” on Page 81
• See “Setting System Frequencies” on Page
67 (below)
• See “Entering/Editing LTR Channel Groups” on
Page
Select the system
Input a system frequency, then press the scroll
control. The scanner then prompts you to enter the
LCN for the entered frequency. Enter the LCN, then
press the scroll control.
To enter additional frequencies, press , use the
scroll control to select , then repeat
the above.
To enter channels in a system, first set up a channel
group (or groups) to hold the channels. Then, enter
the channel and channel parameters in the group(s).
Menu
Menu
67 (below)
Setting System Frequencies
Entering/Editing LTR Channel Groups
Program System
Set Frequencies
New Frequency
New Frequency