Filter
Top Products
Programming Radio Systems
66
Enter a talk group ID
You can enter I-Calls by pressing then the
I-Call number. You can enter the I-Call wild card by
pressing then .
Refer to the appropriate section to change a
channel setting:
• See “Editing the Channel Name” on Page 84
• See “Setting Channel Lockout” on Page 89
• See “Editing the Talk Group ID (Trunked Channels
Only)” on Page 86
• See “Deleting Channels” on Page 90
• See “Copying/Pasting Channels” on Page 90
To program another channel within the same group,
press , then repeat the above. To create another
channel group and enter more channels, press
three times, then proceed from “Entering/Editing
EDACS Channel Groups” on Page 65.
The scanner creates an empty LTR system, with a
default name of .
is a number that increments as you add new
systems. indicates that this is an LTR system.
Next, refer to the appropriate section to set
systemwide options. For most settings, you can
accept the default. However, for the items in , you
must enter information in order for your scanner to
scan the system.
• See “Editing the System Name” on Page 70
Select the group
Edit Channel
New Channel
Program System
New System
LT
Confirm? Yes=”E” / No=”.”
System n L
n
L
Note:
0
bold
Programming LTR Systems