Filter
Top Products
Programming Radio Systems
62
• You can also turn this setting on or off by holding
on a trunked system, then pressing + .
To enter channels in a system, first set up a channel
group (or groups) to hold the channels. Then, enter
the channel and channel parameters in the group(s).
Select the system
The scanner creates a group with a default name of
increments by one for each new
group you create within a system.
Next, refer to the appropriate section to set group-
wide options:
• See “Entering/Editing the Group Name” on
Page 82
• See “Setting the Group Quick Key” on Page 83
• See “Deleting Groups” on Page 83
• See “Copying Systems” on Page 81
• See “Entering/Editing Motorola Channels” on
Page 62
• See “Setting I-Call (Motorola and EDACS Systems
Only)” on Page 77
Select the system
Select the group
E
Entering/Editing Motorola Channel
Groups
Entering/Editing Motorola Channels
Setting Up a Channel Group
Program System
Edit Group
New Group
Group nn. nn
Program System
Edit Group
Edit Channel
New Channel