Filter
Top Products
Searching and Storing
98
Storing a Trunked System
You can store talk group ID’s into the system you
selected in “Selecting a System”. Otherwise, the
scanner stores talk group ID’s in a new group it
creates.
Trunked system search and store does not
work if an EDACS SCAT system is selected, a system
with no frequency is selected, the selected system is
locked out or the quick key to which the system
belongs is turned off, and the group you selected to
store found talk group ID’s contains more talk group
ID’s than the maximum set in Max Auto Store.
To store a trunked system, follow the steps under
“Selecting a System” on Page 97. The scanner
enters ID Search and Store mode.
If the selected system is locked out,
appears and the scanner does not store any
frequencies.
When you select a search range, the scanner looks
for active talk group ID’s within that range and
appears on the display’s lower
line and the system name and search range name
appear on the display’s upper line. When the scanner
finds an active talk group ID, it checks if the talk group
ID has already been stored in the system. If it has, the
scanner continues to search. If the talk group ID has
not been stored, it stores the talk group ID into a
group named , then resumes
searching.
The scanner creates this group if it does not already
exist.
Note:
System Locked
ID
SEARCH AND STORE
Found Channels