Filter
Top Products
Programming Radio Systems
65
Input a system frequency, then press the scroll
control. The scanner then prompts you to enter the
LCN for the entered frequency. Enter the LCN, then
press the scroll control.
To enter additional frequencies, press , use the
scroll control to select New Frequency, then repeat
the above.
The scanner only accepts a single frequency
and no LCN for SCAT systems.
To enter channels in a system, first set up a channel
group (or groups) to hold the channels. Then, enter
the channel and channel parameters in the group(s).
Select the system
The scanner creates a group with a default name of
increments by one for each new
group you create within a system.
Next, refer to the appropriate section to set group-
wide options:
• See “Entering/Editing the Group Name” on
Page 82
• See “Setting the Group Quick Key” on Page 83
• See “Deleting Groups” on Page 83
• See “Editing the Channel Name” on Page 84
• See “Setting Group Lockout” on Page 83
Select the system
Note:
Entering/Editing EDACS Channel Groups
Setting Up a Channel Group
Entering/Editing EDACS Channels
Program System
Edit Group
New Group
Group nn. nn
Program System
Edit Group