Filter
Top Products
Using the Close Call Feature
103
• Lets you select the Close Call
band settings. You can turn the following bands
on or off.
(25.0000-53.9900 MHz)
(54.0000-107.9000 MHz)
(108.0000 - 136.9875 MHz)
(137.0000-224.9000 MHz)
(225.0000-319.9500 MHz)
(320.0000 - 512.0000 MHz)
(764.0000 - 775.9875 MHz,
794.0000 - 956.0000 MHz,
1240.000 - 1300.0000 MHz)
Use the scroll control to select a band, press
the scroll control, then use the scroll control to
select or and press the scroll control.
Turning off undesired bands speeds up Close
Call operation (works for all frequencies listed
above).
When the scanner detects a Close Call hit, it alerts
you according to the Override and Alert settings in the
previous section. While listening to a Close Call hit,
you can press to hold on the hit frequency, press
the scroll control to quickly save the frequency into
memory, press to lock out the frequency from
Close Call and Search operation, or wait for the
transmission to end. If you are in Close Call Only or
Close Call Override mode, and you do not press any
key, the scanner returns to its previous operation after
the transmission ends and the set delay time expires.
If you are holding on the frequency, press again
to resume the previous operation.
Set CC Bands :
VHF Low 1
VHF Low 2
Air Band
VHF High1
VHF High2
UHF
800MHz +
On Off
Close Call Hits
Hold
L/O
Hold