Filter
Top Products
Search and Close Call Options
106
• - select the custom band where you
want to screen out broadcast sources.
- lets you program a custom
frequency range for broadcast screen. Turn the scroll
control to select an option then press the scroll control
to change the setting.
• - select the group where you want to
screen out broadcast sources.
- turn the scroll control to
enter the lower limit of the frequency range,
then press the scroll control to set it.
- turn the scroll control to
enter the upper limit of the frequency range,
then press the scroll control to set it.
This feature sets whether the scanner tries to tune to
a repeater output frequency during Custom Search,
Quick Search, or Close Call operation when it detects
a transmission on a repeater input frequency. Since
you can normally only hear one side of a conversation
when you listen to an input frequency transmission,
turning this feature on can let you hear both sides of
the conversation.
The scanner automatically applies repeater
reverse to detected transmissions. If the scanner
detects the transmission on the output frequency, it
beeps, appears, and it remains
on the output frequency until transmissions end. If it
does not detect a transmission on the output
frequency, it remains on the original frequency.
Band 1-10
Program Band
Band 1-10
Set Lower Limit
Set Upper Limit
Srch/CloCall Opt
Repeater Find
On
Repeater Found
Finding Repeater Output
Frequencies