Filter
Top Products
Page 7-20 Xerox WorkCentre Pro 412 User Guide
NOTE: When feeding media through the Bypass Tray the
paper size option in System Data Settings must be set to the
correct size. If feeding media smaller than A4/Letter, the
setting can remain set at A4, Letter or Legal size. Refer to
Chapter 9 - System Setup, page 9-6 for instructions.
The following table summarizes the print media allowed as well
as their stacking height limit.
a. The height is measured with the stack of sheets laid,
without being touched by hands, on a flat surface.
NOTE: Always load only the print media specified in Appendix
B - Specifications to avoid paper jams and print quality
problems.
NOTE: Do not hit the bypass tray or rest your hands on it;
otherwise the tray may be damaged or detached from the
product.
NOTE: Remove any curl on postcards, envelopes, and labels
before loading them into the bypass tray.
Paper Type Stacking Height Limit
Plain Paper
100 sheets or 9 mm (0.35 inch) max
a
Envelope
10 envelopes or 9 mm (035 inch) max
a
Transparency
30 sheets or 9 mm (0.35 inch) max
a
Label
10 sheets or 9 mm (0.35 inch) max
a
Cardstock
10 sheets or 9 mm (0.35 inch) max
a