Filter
Top Products
Page 4-2 Xerox WorkCentre Pro 412 User Guide
Printing a Document from an Application
This procedure describes the general steps required for
printing from various Windows applications. The exact steps
for printing a document may vary depending on the application
program you are using. Refer to your software application’s
documentation for the exact printing procedure.
The following steps describe the typical process to print from a
Windows environment:
1. Ensure that your WorkCentre Pro 412 is properly
connected to the computer, the machine is powered on,
and there is paper in one of the paper trays.
2. Verify that you have installed the printer driver software for
your machine. For instructions, refer to Chapter 2 - Product
Overview, page 2-26.
3. Start the program you are using to create the document,
and create or open the document you want to print.
4. Choose [Print] or [Page Setup] from the File menu. Ensure
the WorkCentre Pro 412 is selected as your default printer.
Click [Properties] or [Setup] if you want to make any
adjustments that are appropriate for printing your
document.
HINT: For instructions refer to the next section “Printer
Settings”.
5. Click [OK] to close the Properties dialog box.
6. After making any necessary changes to the printing
parameters, click [OK] to start the print job.