Filter
Top Products
Xerox WorkCentre Pro 412 User Guide Page 8-11
Basic Troubleshooting
Duplex Jam
If paper jam occurs in the duplexer, ‘DUPLEX JAM’ appears in
the display.
Bypass Jam
‘BYPASS JAM’ appears in the display when the machine does
not detect paper in the bypass tray due to no paper or improper
paper loading when you try to print using the bypass tray.
‘BYPASS JAM’ also may occur when the paper is not properly
fed into the machine through the bypass tray.
Press the release latch to
open the side cover.
Remove the jammed paper.
Close the side cover.
If ‘BYPASS JAM’ displays
and paper is loaded in the
Bypass Tray, pull the paper
out of the machine and re-
load.