Filter
Top Products
Page 5-2 Xerox WorkCentre Pro 412 User Guide
Faxing Procedure
Before sending a fax identify what is to be faxed, the fax
number and any special programming requirements. Use the
following steps to send a fax.
1. Load the Originals
A choice of document input areas is available. These are:
- An automatic document feeder (ADF) for multiple single
sided originals.
- A document glass for single originals or bound originals.
Automatic Document Feeder (ADF)
Using the Automatic Document Feeder (ADF), you can load up
to 30 documents in one job. Ensure documents are in good
condition, and that all staples and paper clips have been
removed. Ensure any glue, ink or correction fluid on the paper
is completely dry before loading the documents.
Originals should be between 45 g/m
2
and 105 g/m
2
(12.5 lb
and 28 lb), and between B5 (182 x 257 mm / 7 x 10 inch) and
Legal size (216 x 356 mm / 8.5 x 14 inch).
Quick Pathway
Load the Originals.
Press the Copy/Fax/Scan
Key
Choose the Fax features
required.
Enter the fax number.
Press [Start].