Filter
Top Products
Page 8-6 Xerox WorkCentre Pro 412 User Guide
Fuser Area
If jammed in the fuser area, ‘PAPER JAM 1’ appears in the
display.
WARNING:The fuser area is hot. Take care when
removing paper from the machine.
CAUTION:Do not pull paper up through the fusing unit.
Unfused toner may adhere in the area, resulting in
smudged copies.
Insert the paper cassette.
Lower the rear part of the
cassette to align the rear
edge to the corresponding
slot of the machine, then
insert it completely.
Press the release latch to
open the side cover.
Pull down on the fuser lever
as shown below. This will
release pressure on the
paper.
If paper is not seen in this
area, skip to the Exit Area.