Filter
Top Products
Page 9-4 Xerox WorkCentre Pro 412 User Guide
Changing the System Setup Options
Use the following instructions to display or change the default
System Setup options:
Press [Menu/Exit] on the control panel.
Press or until ‘SYSTEM SETUP’ appears, then
press [Select].
Press or to scroll through the options.
To display or change any current setting for any of the
system setup options, choose a feature and press [Select].
The default setting for your selection will be displayed in the
lower line of the LCD.
Press or to display the setting options for the
feature you have selected.
Press [Select] to save the selection. The next System Setup
option appears.
Repeat the procedure to continue changing settings.
Press [Menu/Exit] to exit and return to the previous menu
level. To return to Standby mode, press [Stop].