Filter
Top Products
Adding an Access RuleConfiguring 8950 AAA Operators
............................................................................................................................................................................................................................................................
365-360-001R6.0
Issue 1, December 2008
11-15
............................................................................................................................................................................................................................................................
Figure 11-11 Access Item Configuration Dialog–Command Access Type
As described above for File Pattern, enter a value for Command Pattern using either a
name, a limited wildcard pattern, or the button to the right of the field.
If the selected Access Type is Role, then Rule Pattern appears as the following field, as
shown in Figure 11-12. Enter a value for the Rule Pattern in the same way as described for
File Pattern and Command Pattern.
Figure 11-12 Access Item Configuration Dialog–Role Access Type
1. Select an appropriate access level from the Access Level drop-down list.
Like the File Pattern, the Access Level list values depend upon the selected Access
Type as shown in Table 11-8.
Table 11-8 Access Rules–Access Type and Access Level Components
Access Type Access Level Description
File Update Allows both read and write access
Read Allows read only access
None Denies access