Filter
Top Products
The Server Management Tool User Interface8950 AAA Server Management Tool Overview
............................................................................................................................................................................................................................................................
365-360-001 R6.0
Issue 1, December 2008
2-9
............................................................................................................................................................................................................................................................
Figure 2-7 SMT–Toolbar
The toolbar contains buttons that are used for executing commands within the application.
The commands are described in Table 2-2.
Table 2-2 SMT Tool bar–Buttons
Buttons Description
Log off the currently connected 8950 AAA server. Use the connect menu
option to reconnect.
Show the status of the
8950 AAA Policy server running on the host of the
currently connected 8950 AAA server. When the server is running, the
button is green and if it is not running, the button is red. You can force a
check by clicking the button.
Provides Policy server management and allows control to the 8950 AAA
Policy server. To manage the Policy Server, the following options are
available: the name of the Policy Server, Start Server, Shutdown Server,
Restart Server, Pause Server, and Resume Server.
Show the status of the
8950 AAA Configuration server. When the server is
running, the button is green and if it is not running, the button is red. You
can force a check by clicking the button.
Provides configuration server management and allows control to the 8950
AAA Configuration server. To manage the configuration Server, the
following options are available: the name of the Configuration server,
Start Server, Shutdown Server, and Restart Server.
Save changes within the active panel. If no panel is displayed then this
option is not available.
Save changes in all displayed panels. If no panel is displayed then this
option is not available.
Revert to the last saved panel by abandoning changes to the active panel.
The last saved panel is reloaded. If no panel is displayed then this option
is not available. If no panel is displayed then this option is not available.
SMT Tool Bar