Filter
Top Products
Black Box Hardened Managed Ethernet Switch
Port
Configuration, Port Status, Rate Control, RMON Statistics, Per Port Vlan
Activities.
Configuration
Admin Setting:
1. Command Mode: Interface mode
Logon to Configure Mode (Configure Termin
Then logon to Interface mode.
fe1 means port 1.
The switch_a(config-if)# prompt
switch_a(config)#interface fe1
switch_a(config-if)#
al Mode).
will show on the screen.
2. Usage:
Use the shutdown command to shut do
Use the no shutdown to disable this function.
3. Command Syntax:
(no) shutdown
4. Example:
The following example shows the use of the shutdown command to shut
down the interface fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if)#shutdown
switch_a(config-if)#
wn the selected interface.
Duplex:
1. Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if)#
2. Usage:
Use duplex command to specify the duplex mode to be used for each
interface.
Use the no duplex to disable this function.
3. Command Syntax:
100 User’s Manual