Filter
Top Products
Black Box Hardened Managed Ethernet Switch
User’s Manual 123
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if)#
2. Usage:
Use this command to set or remove the default VLAN for the interface.
3. Command Syntax:
switchport portbase add｜remove vlan VLANID
VLANID The ID of the VLAN will be added to or removed from the Layer-2
interface.
4. Example:
The following example specifies to add the interface fe1 (port 1) to VLANID
(2):
switch_a(config)#interface fe1
switch_a(config-if)#switchport portbase add vlan 2
switch_a(config-if)#