Filter
Top Products
Black Box Hardened Managed Ethernet Switch
switch_a(config)#
2. Usage:
Use this command to specify trap commu
Use the no parameter with this command
SNMP.
3. Command Syntax:
snmp-server trap-community <1-5> NAME
no snmp-server trap-communit
<1-5> The trap community 1-5.
NAME The trap community name for SN
4. Example:
The following example specifies trap communit ) for SNMP:
switch_a(config)#snmp-server trap-community 1 name
switch_a(config)#
nity name for SNMP.
to remove trap community name for
y <1-5>
MP.
y name 1 (name
Trap Host IP Address:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use this command to specify trap host IP address for SNMP.
Use the no parameter with this command to remove trap host IP address for
SNMP.
3. Command Syntax:
snmp-server trap-ipaddress <1-5> IP-ADDRESS
no snmp-server trap-ipaddress <1-5>
<1-5> The trap host IP address 1-5.
IP-ADDRESS The trap host IP address for SNMP. A.B.C.D specifies the IP
address.
4. Example:
The following example specifies trap host 1 IP address (192.168.1.20) for
SNMP:
switch_a(config)#snmp-server trap-ipaddress 192.168.1.20
switch_a(config)#
Cold Start Trap:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
User’s Manual 129