Filter
Top Products
Black Box Hardened Managed Ethernet Switch
(no) snmp-server trap-type enable authenticationFailure
4. Example:
The following example enables authentica :
switch_a(config)#snmp-server tr
switch_a(config)#
tion failure trap for SNMP
ap-type enable authenticationFailure
Topology Change Trap:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Term
The switch_a(config)# prompt will show
switch_a(config)#
inal Mode).
on the screen.
2. Usage:
Use snmp-server trap-type enable top le
topology change trap for SNMP.
Use the no snmp-server trap-type ena topologyChange command to
disable topology change trap fo
3. Command Syntax:
(no) snmp-server trap-type enable topologyChange
4. Example:
The following example enables topology change trap for SNMP:
switch_a(config)#snmp-server trap-type enable topologyChange
switch_a(config)#
4. Example:
The following example enables topology change trap for SNMP:
switch_a(config)#snmp-server trap-type enable topologyChange
switch_a(config)#
ologyChange command to enab
ble
r SNMP.
SNMP v1/v2c
Get Community Name:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use snmp-server community get command to specify and no
snmp-server community get command to remove get community name for
SNMP.
3. Command Syntax:
snmp-server community get NAME
no snmp-server community get
NAME The get community name for SNMP.
4. Example:
132 User’s Manual