Filter
Top Products
Black Box Harden rnet Switch ed Managed Ethe
Strict Priority:
1. Command Mode: Configure mode
Logon to Configure Mode (Config
The switch_a(config)# prompt will show
switch_a(config)#
ure Terminal Mode).
on the screen.
2. Usage:
Use priority-queue out command dite queue.
Use the no priority-queue out comma
queue.
3. Command Syntax:
(no) priority-queue out
4. Example:
The following example enables the egress n the switch:
switch_a(config)#priority-queue o
switch_a(config)#
to enable the egress expe
nd to disable the egress expedite
expedite queue o
ut
Weighted Round Robin:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use wrr-queue bandwidth command to specify the bandwidth ratios of the
transmit queues.
3. Command Syntax:
wrr-queue bandwidth WRR_WTS
WRR_WTS Weighted Round Robin (WRR) weights for the 4 queues (4
values separated by spaces). Range is 1-55.
4. Example:
The following example specifies the bandwidth ratios of the transmit queues
on the switch:
switch_a(config)#wrr-queue bandwidth 1 2 4 8
switch_a(config)#
802.1p Priority
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
User’s Manual 125