Filter
Top Products
Black Box Hardened Managed Ethernet Switch
bridge GROUP priority PRIORITY
no bridge GROUP priority
GROUP <1-1> The ID of the b rity is set.
PRIORITY <0-61440> The bridge priority
4. Example:
The following example sets the priority PRI
(1):
switch_a(config)#bridge 1 priority 4096
switch_a(config)#
ridge group for which the prio
.
ORITY (4096) of bridge GROUP
Hello Time (sec) (1..9):
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt w
switch_a(config)#
ill show on the screen.
2. Usage:
Use this command to set the hello-time, the time in seconds after which (if
this bridge is the root bridge) all the bridges in a bridged LAN exchange
Bridge Protocol Data Units (BPDUs).
3. Command Syntax:
bridge GROUP hello-time HELLOTIME
no bridge GROUP hello-time
GROUP <1-1> The ID of the bridge group to which this hello time is
assigned.
HELLOTIME <1-9> The hello BPDU interval in seconds.
4. Example:
The following example sets the hello-time HELLOTIME (9) of bridge GROUP
(1):
switch_a(config)#bridge 1 hello-time 9
switch_a(config)#
Max Age (sec) (6..28):
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use this command to set the max-age for a bridge.
Use the no parameter with this command to restore the default value of
max-age.
112 User’s Manual