Filter
Top Products
Black Box Hardened Managed Ethernet Switch
Restore Default:
1. Command Mode: Privileged Exec mode
Logon to Privileged Exec Mode
The switch_a# prompt will show on the s
switch_a#
(Enable Mode).
creen.
2. Usage:
Use restore default command to restore
3. Command Syntax:
restore default
4. Example:
The following example restores default setting of the switch:
switch_a#restore default
switch_a#
default setting of the switch.
Auto Save:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use this command to enable auto save configuration function. The
configuration will be automatically saved at every configured interval while
this command is enabled. Use the no form of this command to disable this
feature.
3. Command Syntax:
service auto-config enable
no service auto-config enable
4. Example:
The following example enables or disables auto save configuration to switch:
switch_a(config)#service auto-config enable
switch_a(config)#no service auto-config enable
switch_a(config)#
Auto Save Interval (5~65536 sec):
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
96 User’s Manual