Filter
Top Products
Black Box Hardened Managed Ethernet Switch
3. Command Syntax:
bridge GROUP max-age MAXAGE
no bridge GROUP max-age
GROUP <1-1> The ID of the bridge group
is assigned.
MAXAGE <6-28> The maximum ten for the root
bridge.
4. Example:
The following example sets the max-age M idge GROUP
(1):
switch_a(config)#bridge 1 max-age 28
switch_a(config)#
to which this maximum age time
time, in seconds, to lis
AXAGE (28) of br
Forward Delay (sec) (4..30):
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Term
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
inal Mode).
2. Usage:
Use this command to set the time (in seconds) after which (if this bridge is the
root bridge) each port changes states to learning and forwarding.
Use the no parameter with this command to restore the default value.
3. Command Syntax:
bridge GROUP forward-time FORWARD_DELAY
no bridge GROUP forward-time
GROUP <1-1> The ID of the bridge group to which this delay time is
assigned.
FORWARD_DELAY <4-30> the forwarding time delay in seconds.
4. Example:
The following example sets the forward-time FORWARD_DELAY (30) of
bridge GROUP (1):
switch_a(config)#bridge 1 forward-time 30
switch_a(config)#
RSTP Port Setting
Priority(Granularity 16):
1. Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
User’s Manual 113