Filter
Top Products
Black Box Hardened Managed Ethernet Switch
User’s Manual 21
Administration Console (C
The administration cons riented,
Command Line Interface g system
administration such as di ging option
settings.
Using this method, you can view
from a terminal, personal comp
workstation connected to the swit
There are two ways to use this m
access or modem access. The
these methods.
Direct Access
Direct access to the administration console is achieved by directly
connecting a terminal or a PC equipped with a terminal-emulation
program (such as HyperTerminal) to the switch console port.
When using the management method, configure the terminal-emulation
program to use the following parameters (you can change these settings
after login):
[DEFAULT PARAMETERS]
♦ 115,200bps
♦ 8 data bits
♦ No parity
♦ 1 stop bit
This management method is often preferred because you can remain
connected and monitor the system during system reboots. Also, certain
error messages are sent to the serial port, regardless of the interface
through which the associated action was initiated. A Macintosh or PC
attachment can use any terminal-emulation program for connecting to
the terminal serial port. A workstation attachment under UNIX can use
an emulator such as TIP.
LI)
ole is an internal, character-o
(CLI) for performin
splaying statistics or chan
the administration console
uter, Apple Macintosh, or
ch’s console port.
anagement method: direct
following sections describe