Filter
Top Products
Black Box Hardened Managed Ethernet Switch
3. Command Syntax:
(no) ip igmp snooping fast-leave
4. Example:
The following example enables IGMP sno
switch_a(config)#interface vlan1.1
switch_a(config-if)#ip igmp snooping fast-l
oping fast-leave on vlan1.1:
eave
IGMP querier:
Query-interval:
1. Command Mode: Interface mode
Logon to Configure Mode (Config
Then logon to Interface mode.
fe1 means port 1.
The switch_a(config-if)# prompt will sho
switch_a(config)#interface fe1
switch_a(config-if)#
ure Terminal Mode).
w on the screen.
2. Usage:
Use ip igmp query-interval command to configure the frequency of sending
IGMP host query messages.
To return to the default frequency, use the no ip igmp query-interval
command.
3. Command Syntax:
ip igmp query-interval INTERVAL
no ip igmp query-interval
INTERVAL <1-18000> Frequency (in seconds) at which IGMP host query
messages are sent.
4. Example:
The following example changes the frequency of sending IGMP host-query
messages to 2 minutes on the interface fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if)#ip igmp query-interval 120
IGMP querier:
Max-response-time:
1. Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface fe1
146 User’s Manual