Filter
Top Products
Black Box Hardened Managed Ethernet Switch
switch_a(config)#
2. Usage:
Use this command to set the interval en the configuration would be
automatically saved. The range
default value is 30 seconds.
3. Command Syntax:
service auto-config interval WORD
WORD specifies the interval value.
4. Example:
The following example sets the interval W n the configuration
would be automatically saved to switch:
switch_a(config)#service auto-config interval 10
switch_a(config)#
wh
of interval value is from 5 to 65535. And the
ORD (10) whe
Firmware Upgrade
1. Command Mode: Privileged Exec mode
Logon to Privileged Exec Mode (Enable Mode).
The switch_a# prompt will show on the screen.
switch_a#
2. Usage:
Use install image command to upgrade firmware from tftp server to switch.
3. Command Syntax:
install image IP-ADDRESS WORD
IP-ADDRESS specifies the IP address of tftp server.
WORD specifies the file name to be upgraded to switch.
4. Example:
The following example specifies upgrading firmware (file name: flash.tgz)
from tftp server (IP address: 192.168.1.100) to switch:
switch_a#install image 192.168.1.100 flash.tgz
switch_a#
Please follow the message on the screen during the firmware upgrade
process. Do not turn off the power or perform other functions during this
period of time.
User’s Manual 97