Filter
Top Products
Black Box Hardened Managed Ethernet Switch
Console Configuration
z Connect to the switch console:
Connect the DB9 null-modem or cross over cable to the RS-232 serial
port of the device and the RS-232 serial port of the terminal or computer
running the terminal emulation application. Direct access to the
administration console is achieved by directly connecting a terminal or a
PC equipped with a terminal-emulation program (such as HyperTerminal)
to the switch console port.
z Configuration settings of the terminal-emulation program:
Baud rate: 115,200bps
Data bits: 8
Parity: none
Stop bit: 1
Flow control: none.
z Press the “Enter” key. The Command Line Interface (CLI) screen should
appear as below:
z Logon to Exec Mode (View Mode):
At the “switch_a login:” prompt just type in “root” and press <Enter> to
logon to Exec Mode (or View Mode). And the “switch_a>” prompt will
show on the screen.
4 User’s Manual