Filter
Top Products
Black Box Hardened Managed Ethernet Switch
3. Update Setting: Click “Update Setting” button when you finished GVRP
Global Setting.
Per port setting (include LAG):
1. GVRP: Click “GVRP” drop-down menu from “GVRP” drop-down list to
choose “Enable” or “Disable” to enable or disable GVRP for the port.
2. GVRP applicant: Click “GVRP applicant” drop-down menu from “GVRP
applicant” drop-down list to choose “Active” or “Normal” to the port.
Ports in the GVRP active applicant state send GVRP VLAN declarations
when they are in the STP (Spanning Tree Protocol) blocking state,
which prevents the STP bridge protocol data units (BPDUs) from being
pruned from the other port. Ports in the GVRP normal applicant state do
not declare GVRP VLANs when in the STP blocking state.
3. GVRP registration: Click “GVRP registration” drop-down menu from
“GVRP registration” drop-down list ” to
enable or disable GVRP registration to the nfiguring an
IEEE802.1Q trunk port in registratio
dynamic VLAN creation is enable
VLANs on the trunk port.
4. Update Setting: Click “Update
port setting.
to choose “Enable” or “Disable
port. Co
n mode allows dynamic creation (if
d), registration, and deregistration of
Setting” button when you finished Per
IGMP Snooping
1. IGMP mode: Click “IGMP mode” drop-down menu from “IGMP mode”
drop-down list to choose “Disable”, “Passive”, or “querier” for the switch.
Disable: Disable IGMP on the switch. Passive: The switch with only
multicast-data-forwarding capability. Querier: The switch acts as the
User’s Manual 75