Filter
Top Products
Black Box Hardened Managed Ethernet Switch
Other Protocols
GVRP, IGMP Snooping, NTP
GVRP
GVRP:
1. Command Mode: Configure mode
Logon to Configure Mode (Config
The switch_a(config)# prompt will show
switch_a(config)#
ure Terminal Mode).
on the screen.
2. Usage:
Use set gvrp enable bridge com isable
bridge command to disable (reset) GVR
This command does not enable/disable G
enabling GVRP globally, use the set port
GVRP on individual ports of the bridge.
3. Command Syntax:
set gvrp enable bridge GROUP
set gvrp disable bridge GROUP
GROUP Bridge-group ID used for bridging.
4. Example:
The following example globally enables GVRP to bridge GROUP (1):
switch_a(config)#set gvrp enable bridge 1
switch_a(config)#
mand to enable (set) and set gvrp d
P globally for the bridge instance.
VRP in all ports of the bridge. After
gvrp enable command to enable
Dynamic VLAN creation:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use set gvrp dynamic-vlan-creation enable bridge command to enable
and set gvrp dynamic-vlan-creation disable bridge command to disable
dynamic VLAN creation for a specific bridge instance.
3. Command Syntax:
set gvrp dynamic-vlan-creation enable bridge GROUP
set gvrp dynamic-vlan-creation disable bridge GROUP
GROUP Bridge-group ID used for bridging.
User’s Manual 141