Filter
Top Products
Black Box Hardened Managed Ethernet Switch
SNMP.
5. Trap Community Name: For each “Trap Community Name”, Click in the
“Trap Community Name” textbox and specify a trap community name.
6. Trap Host IP Address: For each “Trap Host IP Address”, Click in the
“Trap Host IP Address” textbox and specify a trap host IP address.
7. Cold Start Trap: Click “Cold Start Trap” drop-down menu from “Cold
Start Trap” drop-down list to choose “Enable” or “Disable” to enable or
disable cold start trap.
8. Warm Start Trap: Click “Warm Start Trap” drop-down menu from “Warm
Start Trap” drop-down list to choose “Enable” or “Disable” to enable or
disable warm start trap.
9. Link Down Trap: Click “Link Down Trap” drop-down menu from “Link
Down Trap” drop-down list to choose “Enable” or “Disable” to enable or
disable link down trap.
10. Link Up Trap: Click “Link Up Trap” drop-down menu from “Link Up Trap”
drop-down list to choose “Enable” or “Disable” to enable or disable link
up trap.
11. Authentication Failure Trap: Click “Authentication Failure Trap”
drop-down menu from “Authentication Failure Trap” drop-down list to
choose “Enable” or “Disable” to ena
trap.
12. Topology Change Trap: Click “Topology Change Trap” drop-down menu
from “Topology Change Trap” drop-down list to choose “Enable” or
“Disable” to enable or disable topology change trap.
13. Update Setting: Click “Update Setting” button when you finished SNMP
General Setting.
ble or disable authentication failure
User’s Manual 65