Filter
Top Products
Black Box Hardened Managed Ethernet Switch
switch_a(config)#snmp-server v3-user my
switch_a(config)#
user ro noauth
SNMPv3 Auth-MD5, SNMPv3 Auth-SHA:
1. Command Mode: Configure mo
Logon to Configure Mode (Configure Term
The switch_a(config)# prompt will show
switch_a(config)#
de
inal Mode).
on the screen.
2. Usage:
Add a user using snmp v3 with read-only o
MD5 or SHA authentication. Use the no f
user.
3. Command Syntax:
(no) snmp-server v3-user USERNAM
AUTH_PASSWORD
USERNAME Specify a user name.
ro read-only access mode
rw read-write access mode
md5 authentication method
sha authentication method
AUTH_PASSWORD authentication password
4. Example:
The following example adds a user (myuser) using snmp v3 with read-write
access mode and MD5 authentication (mypassword):
switch_a(config)#snmp-server v3-user myuser rw auth md5 mypassword
switch_a(config)#
r v3-user USERNAM
AUTH_PASSWORD
USERNAME Specify a user name.
ro read-only access mode
rw read-write access mode
md5 authentication method
sha authentication method
AUTH_PASSWORD authentication password
4. Example:
The following example adds a user (myuser) using snmp v3 with read-write
access mode and MD5 authentication (mypassword):
switch_a(config)#snmp-server v3-user myuser rw auth md5 mypassword
switch_a(config)#
r read-write access mode and with
orm of the command to delete this
E (ro ｜ rw) auth (md5 ｜ sha) E (ro ｜ rw) auth (md5 ｜ sha)
SNMPv3 Priv Auth-MD5, SNMPv3 Priv Auth-SHA:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Add a user using snmp v3 with read-only or read-write access mode, MD5 or
SHA authentication, and privacy. Use the no form of the command to delete
this user.
3. Command Syntax:
(no) snmp-server v3-user USERNAME (ro｜rw) priv auth (md5｜sha)
AUTH_PASSWORD des PRIV_PASS_PHRASE
USERNAME Specify a user name.
134 User’s Manual