Filter
Top Products
Black Box Hardened Managed Ethernet Switch
Switching
Bridging, Static MAC Entry, Port Mirroring
Bridging
Aging Time (seconds):
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Termin
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
al Mode).
2. Usage:
Use this command to specify an ageing-o
The learned MAC address will persist till this specified time.
3. Command Syntax:
Bridge GROUP ageing-time AGEINGTIME
no bridge GROUP ageing-time
Group = <1-1> The ID of the bridge-group that this ageing time is for.
AGEINGTIME = <10-1000000> The number of seconds of persistence.
4. Example:
The following example sets the new AGEINGTIME (1000) to bridge GROUP
(1):
switch_a(config)#bridge 1 ageing-time 1000
switch_a(config)#
ut time for a learned MAC address.
Threshold level (0-100):
1. Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if)#
2. Usage:
Use storm-control level command to specify the rising threshold level for
broadcasting, multicast, or destination lookup failure traffic. The storm control
action occurs when traffic utilization reaches this level.
3. Command Syntax:
storm-control level LEVEL
LEVEL <0-100> specifies the percentage of the threshold; percentage of the
104 User’s Manual