Filter
Top Products
Black Box Hardened Managed Ethernet Switch
STP / Ring
Global Configuration, RSTP Port
Global Configuration
STP Version:
1. Command Mode: Configure mode
Logon to Configure Mode (Config
The switch_a(config)# prompt will show
switch_a(config)#
Setting, Ring Setting
ure Terminal Mode).
on the screen.
2. Usage:
Use this command to choose the Spanni anning
Tree protocol on a bridge.
3. Command Syntax:
bridge GROUP protocol PROTOCOL vlan-
GROUP <1-1> Bridge group name used for bridging.
PROTOCOL
ieee IEEE 802.1Q spanning-tree protocol.
rstp IEEE 802.1w rapid spanning-tree protocol.
4. Example:
The following example chooses the PROTOCOL (rstp) on bridge GROUP
(1):
switch_a(config)#bridge 1 protocol rstp vlan-bridge
switch_a(config)#
ng Tree protocol or Rapid Sp
bridge
Rapid Spanning Tree Protocol:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use this command to enable the Rapid Spanning Tree protocol on a bridge.
Use the no form of the command to disable the Rapid Spanning Tree protocol
on a bridge.
3. Command Syntax:
bridge GROUP rapid-spanning-tree enable
no bridge GROUP rapid-spanning-tree enable BRIDGE-FORWARD
GROUP <1-1> Bridge group name used for bridging.
BRIDGE-FORWARD Puts all ports of the specified bridge into the
110 User’s Manual