Filter
Top Products
Black Box Hardened Managed Ethernet Switch
The following example specifies get comm (name) for SNMP:
switch_a(config)#snmp-server commun
switch_a(config)#
unity name
ity get name
Set Community Name:
1. Command Mode: Configure mo
Logon to Configure Mode (Configure Term
The switch_a(config)# prompt will show
switch_a(config)#
de
inal Mode).
on the screen.
2. Usage:
Use snmp-server community set c
snmp-server community set command to
SNMP.
3. Command Syntax:
snmp-server community set NAME
no snmp-server community set
NAME The set community name for SNMP.
4. Example:
The following example specifies set community name (name) for SNMP:
switch_a(config)#snmp-server community set name
switch_a(config)#
ommand to specify and no
e for remove get community nam
SNMP v3
SNMPv3 No-Auth:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Add a user using snmp v3 with read-only or read-write access mode and
without authentication. Use the no form of the command to delete this user.
3. Command Syntax:
(no) snmp-server v3-user USERNAME (ro｜rw) noauth
USERNAME Specify a user name.
ro read-only access mode
rw read-write access mode
4. Example:
The following example adds a user (myuser) using snmp v3 with read-only
access mode and without authentication:
User’s Manual 133